Combined material

Tamahagane, which in Japanese literally means "jewel steel" or "precious steel", is a type of steel made in the Japanese traditional way. Tamahagane is made by smelting iron sand in a clay furnace called "tatara" and mixing it with charcoal to produce steel with various carbon content. This very laborious process takes as much as 3 days. After the smelting process, the tatara is broken and the steel bloom or "kera" is broken and swordsmiths segregate and collect the steels with various carbon contents.

Making a blade from tamahagane requires high level of expertise from the swordsmith. Swordsmiths will laminate the different types of steel collected from the kera to create a sword which has a hard edge, soft core and springy sides.

Ryan1277 is a katana with a blade made of Chinese tamahagane. The blade of this sword is hazuya-jizuya polished to bring out the beauty of the blade. It takes a polisher several weeks to do the entire polishing process. The tsuka is made of hardwood and fully wrapped with one-piece genuine rayskin and real leather ito. The tsuba, fuchi, menuki and kashira are made of copper and with silver plating. The saya is made of hardwood with dragon engraving. Black buffalo horns are used as koiguchi, kurikata and kojiri.  The sword is fully customizable.

Wakizashi are considered a samurai's side arm and supplemental weapon. It is effective weapon when fighting in confined spaces as typical Japanese dwellings had low ceiling. Samurai warriors often sleep with their wakizashi and carry them even when inside castles, residences unlike the katana that they sometimes had to leave to a servant. The use of the wakizashi though was not limited to the samurai as merchants, craftsmen and other individuals sometimes carry it for protection.

Ryan1276 is one of our high-end works, it has shinogi zukuri with niku blade in honsanmai lamination. The edge is made of 1095 high carbon steel and the sides made of folded 1060 steel. The blade is differentially-hardened with a beautiful, natural hamon and hada. The tsuka is made of hardwood, fully wrapped with one-piece genuine rayskin and black, synthetic silk ito. The saya is also fully wrapped with genuine, unpolished rayskin. Black buffalo horns are used as kojiri, koiguchi and kurigata. The tsuba, fuchi, kashira and menuki are copper with dragon motif.

Tamahagane, which in Japanese literally means "jewel steel" or "precious steel", is a type of steel made in the Japanese traditional way. Tamahagane is made by smelting iron sand in a clay furnace called "tatara" and mixing it with charcoal to produce steel with various carbon content. This very laborious process takes as much as 3 days. After the smelting process, the tatara is broken and the steel bloom or "kera" is broken and swordsmiths segregate and collect the steels with various carbon contents.

Making a blade from tamahagane requires high level of expertise from the swordsmith. Swordsmiths will laminate the different types of steel collected from the kera to create a sword which has a hard edge, soft core and springy sides.

Ryan1273 is a katana with a blade made of Chinese tamahagane. The blade of this sword is hazuya-jizuya polished to bring out the beauty of the blade. It takes a polisher several weeks to do the entire polishing process. It has a sugu or straight hamon and the hada of the blade can be clearly seen.The tsuka is made of hardwood and fully wrapped with one-piece genuine rayskin and synthetic silk ito. The tsuba, fuchi, menuki and kashira are made of iron and with dragon pattern. The saya is made of hardwood, wrapped with bamboo. Black buffalo horns are used as koiguchi, kurikata and kojiri.  The sword is fully customizable.

Odachi or nodachi was a type of traditionally made Japanese sword used by the samurai class of feudal Japan. Odachi are difficult to produce because their length makes traditional heat treatment more complicated: The longer a blade is, the more difficult (and expensive) it is to heat the whole blade to a homogeneous temperature, both for annealing and to reach the hardening temperature. The quenching process then needs a bigger quenching medium because uneven quenching might lead to warping the blade.  

This odachi is intricately forged in the honsanmai lamination structure. The edge is made of 1095 high carbon steel which has high hardness while the sides are made of folded steel which has high flexibility and has a beautiful grain pattern or hada.

This odachi is differentially hardened and has a visible hamon. The tsuka is wrapped with genuine rayskin and synthetic silk ito. The pattern on the saya is shell patchwork. The koiguchi, kojiri and kurigata are buffalo horn. The fittings are made of copper.

Ryan1244 is a katana in shirasaya mount. The blade has a shinogi zukuri geometry with a mild 1.3 cm sori or curvature. It has a laminated blade with an edge made of 1095 carbon steel and sides made of folded steel with a beautiful hada. It is clay-tempered with a natural hamon and with a bohi that starts above the habaki and terminates at the yokote. The saya and tsuka of this sword is made of a light-colored hardwood and the blade is secured to the handle with a single bamboo peg or menuki. Though the blade is made of durable steel, this sword is not really intended for cutting as a shirasaya furniture is only intended as a storage for a blade which will not be used for a considerable time.

The blade is honsanmai lamination, 1095 high carbon steel is the cutting edge, folded steel is used as jacket steel. The blade is shinogiz zukuri with niku, it can be used to cut hard things such as bones and iron wire. It is clay-tempered with a natural hamon. The tsuka is made of hardwood, it's wrapped with genuine rayskin panels and synthetic silk ito. The saya is made of hardwood, partially wrapped with polished genuine rayskin. The kurigata, koiguchi and kojiri are made of real buffalo horns. The tsuba, fuchi and kashira are made of copper with silver plating. The sword is well-balanced and assembled tightly.

Ryan1168 is one of our midlevel swords. The blade is of a shinogi-zukuri geometry and in a gyaku kobuse style of lamination. The edge is made of 1095 high carbon steel while the core is made of a softer steel. The blade is differentially-hardened with a natural hamon and can take on hard targets. The tsuka is made of hardwood, wrapped with genuine rayskin and synthetic silk ito. The tsuba, fuchi and kashira are all made of copper inlayed with silver and feature an intricate flower theme. The menuki is a silver praying mantis while the habaki and seppa are also made of brass. The saya is made of hardwood with black buffalo horn koiguchi, kurikata and kojiri. It has a smooth, black lacquer finish and has grooves along its length. The sageo is black synthetic silk.

The blade is honsanmai lamination, 1095 high carbon steel is the cutting edge, folded steel is used as jacket steel. It is clay-tempered with a natural hamon. Besides the hamon, the boundary lines between different steels are also visible. The tsuka is made of hardwood, it's wrapped with genuine rayskin and synthetic leather ito. The saya is made of hardwood, it is covered in polished mother-of-pearl and shells and give a unique glow of random colors. The koiguchi, kurigata and kojiri are polished buffalo horns. The tsuba, fuchi, kashira are made of iron. The sword is fully customisable.

Tamahagane, which in Japanese literally means "jewel steel" or "precious steel", is a type of steel made in the Japanese traditional way. Tamahagane is made by smelting iron sand in a clay furnace called "tatara" and mixing it with charcoal to produce steel with various carbon content. This very laborious process takes as much as 3 days. After the smelting process, the tatara is broken and the steel bloom or "kera" is broken and swordsmiths segregate and collect the steels with various carbon contents.

Making a katana from tamahagane requires high level of expertise from the swordsmith. Swordsmiths will laminate the different types of steel collected from the kera to create a sword which has a hard edge, soft core and springy sides.

Ryan1180 is a katana or more specifically a handachi with a blade made of Chinese tamahagane. A handachi or "half-tachi" is a blade with tachi style fittings on the tsuka but has a saya that of a katana. The blade of this sword is hazuya-jizuya polished to bring out the beauty of the blade. It has a sugu or straight hamon and the hada of the blade can be clearly seen. The habaki, seppa, fuchi, menuki and kabuto-gane are all made of chromed brass while the tsuba is silver-plated. The tsuka is made of hardwood and fully wrapped with one-piece genuine rayskin. The saya is made of hardwood and painted with high quality black piano painting. Black buffalo horns are used as koiguchi, kurikata and kojiri.  The sword is fully customizable.

Tamahagane, which in Japanese literally means "jewel steel" or "precious steel", is a type of steel made in the Japanese traditional way. Tamahagane is made by smelting iron sand in a clay furnace called "tatara" and mixing it with charcoal to produce steel with various carbon content. This very laborious process takes as much as 3 days. After the smelting process, the tatara is broken and the steel bloom or "kera" is broken and swordsmiths segregate and collect the steels with various carbon contents.

Making a blade from tamahagane requires high level of expertise from the swordsmith. Swordsmiths will laminate the different types of steel collected from the kera to create a sword which has a hard edge, soft core and springy sides.

Ryan858 is a katana with a blade made of Chinese tamahagane. The blade of this sword is hazuya-jizuya polished to bring out the beauty of the blade. It takes a polisher several weeks to do the entire polishing process. The blade has choji hamon, hadori polish is done to make the hamon stand out against surrounding areas. The tsuka is made of hardwood, fully wrapped with one-piece genuine rayskin and leather ito. The tsuba, fuchi and kashira are made of iron. The saya is made of hardwood and wrapped with bamboo. Koiguchi, kurikata and kojiri are polished buffalo horns. The sword is fully customizable.