Taiji Jian(sword) is a straight two-edged sword used in the training of the Chinese martial art Taiji Quan. It’s also a traditional Taiji weapon. Compared with other weapons, Taiji Jian is light and agile, it is not suitable for heavy cutting. A well-made Taiji Jian requires a lot of skill and experience from the smith to make a well-balanced blade with good flexibility (excluding mold-made stainless steel blades). The P.O.B (point of balance) of traditional Taiji Jian is generally located at around 5cm in front of the hand guard. The width at the hand guard is 3.5cm and taper to the tip. There are two kinds of blades used in traditional Chinese martial art----soft and hard. The soft blade is more for show, not functional for cutting. The hard blade is made of carbon steel, it is flexible but hard enough to cut. The flexibility is very important for a Taiji Jian. A easy way to tell the flexibility is to stab the tip of the blade into a block of wood on the ground. The sword will not stand stably by itself if the blade is too “soft”; if the blade is too hard, then the sword will not move at all. The good blade is when you push it, it swings a bit, something like a clock pendulum but it stands vertically very soon. There are many kinds of fittings can be used on Taiji Jian, but brass fittings with engraving are the most typical. Usually the hand guard is yuanbao-shaped( Yuanbao is gold or silver ingot used in ancient China).

Taiji Jian(sword) is a straight two-edged sword used in the training of the Chinese martial art Taiji Quan. It’s also a traditional Taiji weapon. Compared with other weapons, Taiji Jian is light and agile, it is not suitable for heavy cutting. A well-made Taiji Jian requires a lot of skill and experience from the smith to make a well-balanced blade with good flexibility (excluding mold-made stainless steel blades). The P.O.B (point of balance) of traditional Taiji Jian is generally located at around 5cm in front of the hand guard. The width at the hand guard is 3.5cm and taper to the tip. There are two kinds of blades used in traditional Chinese martial art----soft and hard. The soft blade is more for show, not functional for cutting. The hard blade is made of carbon steel, it is flexible but hard enough to cut. The flexibility is very important for a Taiji Jian. A easy way to tell the flexibility is to stab the tip of the blade into a block of wood on the ground. The sword will not stand stably by itself if the blade is too “soft”; if the blade is too hard, then the sword will not move at all. The good blade is when you push it, it swings a bit, something like a clock pendulum but it stands vertically very soon. There are many kinds of fittings can be used on Taiji Jian, but brass fittings with engraving are the most typical. Usually the hand guard is yuanbao-shaped( Yuanbao is gold or silver ingot used in ancient China).

The blade is made of 1095 carbon steel, very sharp and durable. The scabbard and handle are made of high-density ebony wood, the color is natural. The fittings are made of brass with beautiful engraving. The blade can be dull per customer request. The blade length is customizable.

The blade is folded forged from 1095 high carbon steel, it's full tang and sharpened. Folding grains are clearly visible on the blade. The blade is durable, there's scorpion engraved on it. The handle is made of hardwood and wrapped with genuine rayskin and synthetic silk ito. The saya is made of hardwood. The tsuba is made of iron. The sword is fully customizable.

The blade is folded-forged from 1095 high carbon steel, beautiful folding grains are clearly visible. It can be used on heavy targets without compromising its edge. The hamon is abrasived. The sword is equipped with a blow pile and a dozen of needles. It's a very cool sword if you want to cosplay a ninja, because it's a real sword.

A beautiful and durable white sword, the blade is made of 9260 spring steel, it can be used on heavy targets without compromising its edge. It's unokubi zukuri, the thickness on the back becomes thinner from the half of the blade towards the tip, but the back turns to thick near the kissaki. The tsuka is made of hardwood and with genuine same and synthetic silk ito. The tsuba, fuchi and kashira are made of copper with bamboo motif.

The blades are made of 1095 high carbon steel, it can be used on heavy targets without compromising its edge. Blade shape is unokubi zukuri, the thickness on the back becomes thinner from the half of the blade towards the tip, but the back turns to thick near the kissaki. The hamons are hand-abrasived. The tsukas are made of hardwood, wrapped with genuine same and synthetic silk ito. The tsubas are made of copper. The sword is fully customizable, the fittings can be changed.