-
Clay Tempered Odachi Japanese Long Sword Copper Tsuba Shell Saya Honsanmai--Ryan1247
$340.00Odachi or nodachi was a type of traditionally made Japanese sword used by the samurai class of feudal Japan. Odachi are difficult to produce because their length makes traditional heat treatment more complicated: The longer a blade is, the more difficult (and expensive) it is to heat the whole blade to a homogeneous temperature, both for annealing and to reach the hardening temperature. The quenching process then needs a bigger quenching medium because uneven quenching might lead to warping the blade.
This odachi is intricately forged in the honsanmai lamination structure. The edge is made of 1095 high carbon steel which has high hardness while the sides are made of folded steel which has high flexibility and has a beautiful grain pattern or hada.
This odachi is differentially hardened and has a visible hamon. The tsuka is wrapped with genuine rayskin and synthetic silk ito. The pattern on the saya is shell patchwork. The koiguchi, kojiri and kurigata are buffalo horn. The fittings are made of copper.
-
20" Tanto Japanese Short Sword Genuine Rayskin Tsuka Full Tang Razor Sharp--Ryan1246
$145.00The tanto or short sword is a Japanese blade used by the samurai class of feudal Japan. It dates back to the Heian period and was mainly designed for stabbing but can be used for close quarter slashing. Women would sometimes carry a tanto concealed in their sash or obi for self-defense. Ryan1246 blade is made of 1095 high carbon steel, very sharp. The tsuka is made of hardwood and wrapped with genuine rayskin without ito. Black buffalo horns are used as fuchi, kashira and koiguchi. The tsuba is plain iron. -
Wakizashi 9260 Spring Steel Clay Tempered Shell Saya Hazuya Polished--Ryan1245
$360.00This wakizashi is one of our special design products. The blade is made of 9260 sping steel and clay tempered, it’s hazuya polished so the area between hamon and back is white. Its saya is covered in polished mother-of-pearl and shells, it gives a unique glow of random colors. The koiguchi,kurikata and kojiri is made of polished, black buffalo horn. The tsuba is made of folded steel, beautiful grains of the steel are visible. Fuchi and kashira are iron with silver embedded.
-
Clay Tempered Shirasaya Katana Sanmai Combined Material Full Tang Sharp Light Cutting--Ryan1244
$200.00Ryan1244 is a katana in shirasaya mount. The blade has a shinogi zukuri geometry with a mild 1.3 cm sori or curvature. It has a laminated blade with an edge made of 1095 carbon steel and sides made of folded steel with a beautiful hada. It is clay-tempered with a natural hamon and with a bohi that starts above the habaki and terminates at the yokote. The saya and tsuka of this sword is made of a light-colored hardwood and the blade is secured to the handle with a single bamboo peg or menuki. Though the blade is made of durable steel, this sword is not really intended for cutting as a shirasaya furniture is only intended as a storage for a blade which will not be used for a considerable time.
-
55" Nodachi Japanese Sword 1095 Folded Steel Iron Tsuba--Ryan1249
$180.001) The sword will go with a free sword bag and spare Mekugies(bamboo nails).
2) Our products are 100% handmade, so specification varies slightly from sword to sword. We appreciate your understanding. -
Honsanmai Clay Tempered Wakizashi Japanese Short Sword Rayskin Saya Copper Tsuba Heavy Cutting--Ryan1229
$300.00The blade is honsanmai lamination, 1095 high carbon steel is the cutting edge, folded steel is used as jacket steel. The blade is shinogiz zukuri with niku, it can be used to cut hard things such as bones and iron wire. It is clay-tempered with a natural hamon. The tsuka is made of hardwood, it's wrapped with genuine rayskin panels and synthetic silk ito. The saya is made of hardwood, partially wrapped with polished genuine rayskin. The kurigata, koiguchi and kojiri are made of real buffalo horns. The tsuba, fuchi and kashira are made of copper with silver plating. The sword is well-balanced and assembled tightly.
-
Double Swords in Deadpool Folded Steel BrassTsuba with Back Harness--Ryan1220
$290.00Ryan1220 is another replica of the twin swords used by Deadpool. Deadpool is a Marvel Comics character portrayed in two Marvel movies released in 2016 and 2018. In the story, his name is Wade Wilson and is a former special forces operative who becomes a mercenary. He becomes sick with cancer and agrees with a secretive organization offering an experimental cure for his cancer. The treatment cured Wilson of his cancer and gives him superhuman healing ability but leaves him with severe scars all over his body. He adopts the name Deadpool and becomes a vigilante with his trademark red costume and twin blades which he uses in close quater fighting.
Ryansword's replica of Deadpool's twin swords have blades made of through-hardened folded steel with a beautiful hada and a wire-brushed hamon. The fittings are made of brass and the tsuba has a rectangular shape like a ninjato. The tsuka has white rayskin panels and wrapped with black synthetic silk ito. The sayas are made of hardwood, a back strap will be shipped with the swords.
-
Sakabato Reversed-Edge Shirasaya Katana Japanese Sword 1095 Steel Clay Tempered Light Cutting--Ryan1218
$200.00Historically, there are no records of reverse-edged katanas in medieval Japan. The reverse-edged katana was popularized by the manga Samurai-X where the main character Rurouni Kenshin uses a reverse-edge katana to avoid killing opponents in a swordfight.
Ryan1218 is a katana in shirasaya case. The blade is made of differentially-hardened 1095 carbon steel with a visible, natural hamon. The saya and tsuka is made of beautiful, light-colored wood with brown buffalo horn. Blades in shirasaya casing are not really intended to be used for cutting as the handle is prone to break without the support of the rayskin and ito wrap and the fuchi and kashira. When a katana is not to be used for a considerable time, the blade was usually mounted in shirasaya case to prevent rusting.
-
Folded Steel Blue Blade UNOKUBI-ZUKURI Genuine Rayskin Saya--Ryan1226
$199.00
Ryan1226 is a katana whose blade is of the unokubi-zukuri geometry. This blade type is usually common in shorter blades like tanto. The blade of this sword is made of through-hardened, folded 1060 steel with bluish-red, oxidized coating. This coating adds corrosion resistance to the blade. It has two grooves, a bo-hi (wide groove) and a so-hi (narrow groove) which terminates in the middle portion of the blade. The black fuchi, kashira and tsuba are made of iron. The tsuka is hardwood with black rayskin panels and blue, synthetic leather ito in katatemaki wrap. The saya has a partial wrap of green rayskin with polished, buffalo horn koiguchi, kurikata and kojiri. -
European Medieval Sword Double Edge Folded Steel Iron Fittings--Ryan1216
$270.00Ryan1216 is a replica of a Medieval European double-edged sword, the blade is full tang and sharpened. The blade is made of folded steel, folding grains are clearly visible. The handguard and pommel are made of iron, the handle wrapped with brown wax cord. The sheath is made of hardwood and wrapped with brown leather. -
Euopean Medieval Sword Double Edge Folded Steel Blade Iron Fittings--Ryan1215
$270.00Ryan1215 is a replica of a Medieval European double-edged sword, the blade is full tang and sharpened. The blade is made of folded steel, folding grains are clearly visible. The handguard and pommel are made of iron, the handle wrapped with black wax cord. The sheath is made of hardwood and wrapped with black leather.
-
Black Mamba katana Kogarasu-Maru 9260 Spring Steel Clay Tempered--Ryan1210
$261.00The black mamba is a highly venomous snake endemic to Africa. It got its name from its dark coloration and black mouth which gives it a very deadly look. Ryan1210 is a katana with a black theme and with a lethal look as the snake from which it is named after. The tsuba, fuchi and kashira are made of blackened brass with a snake design. The habaki and seppa are also blackened brass. The tsuka is hardwood wrapped with black rayskin and black suede ito. Suede is a tough material which helps make an excellent grip on the handle of the sword. The saya is matte black with a partial wrap of unpolished black rayskin. It also has black buffalo horn koiguchi, kojiri and kurikata.
The blade is made of differentially-hardened 9260 spring steel with kissaki moroha zukuri geometry. This unique blade form is a rare and old style of sword and may be a transition between the Japanese double-edged sword and the tachi. One of the famous swords with the kissaki moroha zukuri style is the Kogarasu Maru or "Little Crow" which was forged sometime in the early Heian or late Nara period. The Kogarasu Maru is a treasure of the Taira Clan and now a part of the Japanese imperial collection.